Close
The company MORFI HYDRAULICS suppliers from the following manufacturers pumps, motors, controls, valves and spare parts for hydraulic cranes, steering systems, winches etc.
Stay up to date with our latest news, receive exclusive deals, and more.
All rights reserved © Morfi-hydraulics.gr 2021 - constructed by eContent Systems
High pressure
Medium pressure
Low pressure
Horizontal installation
Vertical installation
Vertical submerged installation
SP-CART, ARE,ARAM,AGAM,AGIR,AGIS,AGIU,REM,QV-06,QV-10,20,AQFR,ADR,ADRL,AGRL,AGRLE,HMP,HM,KM,HS,KS,HG,KG,JPG-211,JPG-311,HC-011,KC-011,JPC-211,HQ,KQ,JPQ,DHQ,DKQ,HR,KR,JPR,MAP.
HMP,HM,KM,HS,KS,HG,KG,JPG,HC,KC,JPC,HQ,KQ,JPQ, DHQ, DKQ, HR, KR,JPR, MAP.
DHI, DHU, DHE, DHER, DKE, DKER,DLOH,DLOK,DPH,JO-DL,DH,DK,DP,DPH
RZMO-A,RZMO-TERS(AERS),RZGO-A,RZGO-TERS,RZGO-A,AGMZO-A, AGMZO-TERS(AERS),AGRCZO-A,AGRCZO-TERS(AERS),HZMO-A,RZMO-TERS(AERS),RZGO-A,HZGO,KZGO,RZGO-TERS,DHZO-A,DKZOR-A,DPZO-A,DPZO-T,DPZO-L,DLHZO-T,DLKZOR-T,LICZO-A,LIMZO-A,LIRZO-A,LICZO-TERS(AERS),LIMZO-TERS(AERS),LIRZO-TERS(AERS),LEQZO-A,LIQZO-T,LIQZO-L,QVHZO-A,QVKZOR-A,QVHZO-T,QVKZOR-T,QVHMZO,QVKMZOR,QVMZO.
A2F10-A2F12-A2F16-A2F23-A2F28-
A2F500-A2F710-A2F1000
Plata [LVP]
Features
Variable displacement axial piston pumps swash plate design.
PLATA pumps are ideally suited for medium and high pressure open circuit applications.
Displacements from 1.75 in³/rev (28,7 cm³/rev) to 5.36 in³/rev (87,9 cm³/rev)
Max. peak pressure up to 5075 psi (350 bar)
Max. speed up to 3000 min-1
Energy saving
Low noise emission
Short response time
Drive shaft bearing suitable for radial and axial loads
Multiple combinations
MVP – MVPD Features
Variable displacement axial piston pumps swash plate design ideally suited for open circuit in mobile hydraulic applications.
The compact design allows to be mounted directly on engine motors. The new “MVPD” series allow higher flow rates than traditional pumps with the same dimension, higher machine speeds without affecting the design of the hydraulic system and a high power-to-dimension ratio.
Displacements from 0.85 in3/rev (14 cm3/rev) to 5.17 in3/rev (84.7 cm3/rev).
Max. peak pressure up to 5075 psi (350 bar).
Max. speed up to 3700 min-1
MVPD additional features
Higher speed.
Higher power -to-weight ratio.
Cost-optimized design
TVP Features
Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications.
The compact design allows to be mounted directly on the PTOs.
Displacements from 3.66 in³/rev (60 cm³/rev) to 5.17 in³/rev (84,7 cm³/rev).
Max. peak pressure up to 5800 psi (400 bar).
Max. speed up to 3000 min-1
Pump internal drain line
Compensators external drain line
Direct mounting on the PTOs
Body width 4.8898 in (124,2 mm)
Compact design
Low noise emission
Plata [DVP-SVP] Features
Variable displacement axial piston pumps swash plate design for open circuit applications.
SVP single flow, DVP dual flow on piston pump and an additional piggybacked gear pump.
The automatic overall torque limiter allows to optimize the performance of the machine.
SVP and DVP pumps has been designed specifically for mini excavators where compactness and ease of installation are critical.
Piston pump: displacements from 0.48 in³/rev (7,8 cm³/rev) to 1.83 in³/rev (30 cm³/rev).
Gear pump: displacements from 0.30 in³/rev (4,95 cm³/rev) to 1.29 in³/rev (21,14 cm³/rev).
Max. speed up to 2600 min-1
Compact design
Torque limiter
Energy saving
Low noise emission
Long service life
Fixed displacement axial piston pumps and motors
Strada [BAP] Features
Fixed displacement bent axis piston pumps.
STRADA pumps are ideally suited for PTOs applications in vehicles.
Displacements from 2.49 in³/rev (40,9 cm³/rev) to 6.71 in³/rev (110 cm³/rev) available in groups 32 and 37.
Max. peak pressure up to 5800 psi (400 bar).
Max. speed up to 2950 min-1.
Low noise level
Direct mounting on the PTOs
Compact design
High speed
High volumetric, mechanical and overall efficiency
Available in ISO standard
Plata [LF] Features
Fixed displacement axial piston pumps and motors swash plate design for open circuit applications.
The design is extremely compact and it can integrate many functions.
An electrically controlled valve can be fitted on the pump and an electronic board controls the flow and the speed of the powered motor.
Unidirectional pumps LFP48: displacements from 1.65 in³/rev (27 cm³/rev) to 2.94 in³/rev (48,2 cm³/rev).
Reversible motors LFM30: displacements from 1.34 in³/rev (22 cm³/rev) to 1.84 in³/rev (30,2 cm³/rev).
Max. peak pressure up to 5075 psi (350 bar).
Pump
Possibility to have on the pressure line a three-position electrically controlled valve with relief valve
Possibility to mount an auxiliary gear pump with common suction
Internal drain
Motor
Reversible rotation with integral antishock valves
European and SAE standard mounting flanges
Side or rear inlet options
Compact size
T6C-T6CM-T6CP-T6D-T6E-T6CC-T6DC-T6EC-T6ED-T6EE-T6EES-T6DCCM-T6EDC
T7AS-T7ASW-T7B-T7BS-T7D-T7DST7E-T7ES-T7BB-T7BBS-T67CB T7DB-T7DBS-T67DC-T7DD-T7DDS-T7EB-T7EBS-T67EC-T7ED-T7EDS T7EE-T7EEST7DBB-T7DBBS-T7DVB-T7DCBS-T7DCC-T7DCCS-T7DDB T7DDBS-T67DDCS-T7EDB-T7EDBS-T67EDC-T67EDCS-T7EECT7EECS
Some of the features include:
High volumetric flows even with high operating pressures;
Low noise level;
High endurance due to the balancing system of the loads on the guide bushings;
Displacements of up to 9,1 – 27,9 and 87,6 cm3/rev, and with operating pressures of up to 250 bar (standard) and up to 310 bar (version for high pressures H).
Some of the features include:
High volumetric flows even with high operating pressures;
Low noise level
High endurance thanks to the balancing system of the loads on the guide bushings.
Displacements going from 1,1 to 8,0 cm3/rev and with operating pressures of up to 230 bar.
Some of the features include:
High volumetric performance levels due to both radial and axial compensation in proportion to operating pressure;
Low noise levels;
Optimal load distribution and special friction bearings.
Series 5 Steering Units
Series 10 Steering Units
Series 20 Steering Units
Steering Columns and Steering Wheels
Series 25 Steering Control Units
25500 Series
74624 Piston Motors
Model 6 Light Duty
Model 7 Light Duty
26000 Series
72400 Piston Pumps
70122 Piston Pumps
70142 Piston Pumps
74111 Piston Motor
74118 Piston Motors
74318 Piston Motors
Steering Unit 3, 6 and 12 Series
We stock the most common Hydromatik hydraulic pumps. We offer these in a wide range of models, either new or technically overhauled. We are also happy to repair faulty hydraulic units:
LPF:
LPV:
DPVD:
DPVO:
DPVPO:
DPVG:
HPR:
HPV 130 LHPV:
BPV:
BPR:
B2PV:
PV:
PR:
2PV:
Radial hydraulic pumps from Moog (also known as RKP), previously Bosch RKP, are high-performance variable pumpsfor industrial applications. Resilient, hard-wearing, long service life, highly reliable, short adjustment times, and high efficiency are the distinguishing features of these pumps. We are happy to supply these radial piston pumps in the required size, with analogue or digital controls.
SPV Series:
Series 42:
Series 45:
Sauer 90R075FA6 Series 45 – 90 cm³
Series 90:
V10 Vickers Vane Pumps
Vickers VTM Series
V20 Vickers Vane Pumps
